If you're still interested in sharing the RockChipFactoryToolv5.3.zip file, then use any of the following sharing options to share it with anyone: Sharing Links File URL. Sep 08, 2021 Download RockChip Batch Tool. RockChip Batch Tool is compatible with all versions of Windows OS, including Windows XP to Windows 11 (x32 or x64 bit). If in case you were looking for the latest version of the tool, then use the following links to get it on the computer: v1.23: RockChipBatchToolv1.23.zip. V1.24: RockChipBatchToolv1.24.zip.
- 2Windows
- 2.1Install driver
- 2.2Flash Image
- 2.3Troubleshooting
- 3Linux
- 3.1Upgrade_tool from Rockchip
- 3.1.2Flash by partitions
- 3.4Troubleshooting
- 3.1Upgrade_tool from Rockchip
This page describes how to install an image to the nand flash of Radxa Rock, ie, how to flash the board. You can choose to either flash the whole nand image (ie, update.img) to the board or just flash the selected partitions. You can download the prebuilt images from our server or build your own images.
Before you start
Keep in mind that:
What you will need to flash the board is:
- Firmware image, check hardware revision. there are Pro and Full/Lite, firmware is different
- Radxa Rock or Rock Pro or Rock2 Square board
- a PC running Windows (XP 32/64bit, Windows 7 32/64 bit) or Linux (32/64bit)
- a micro USB cable with one side plugged in to the OTG port of the board and the other side plugged into the USB port on PC.
Windows
The Windows tool for flashing the image is provided by Rockchip. To flash the update.img(you'd better click this link and read this page,it's very Important for the radxa beginner), you need to use the RKBatchTool and to flash the partitions, you will need to use RKDevelopTool. Both RKBatchTool and RKDevelopTool rely on the RK USB driver so you will need to install it first as below:
Install driver
- install using RKDriverAssistant tools - the easy way(Just for winXp, Vista, Win7,not support Win8)
- install manually (WinXp,Vista,Win7,Win8)
If you have already installed the USB driver please skip this step.
a. Install using RK Driver Assistant tools
Note:The method just support WinXp,Vista,Win7, NOT SUPPORT Win8
There’s no need to connect your Rockchip device during this procedure just download and extract RKDriverAssistant.zipThen double click on DriverInstall.exe in the RKDriverAssistant directory to start the utility.If you've previously tried to install the Rockchip USB drivers for any Rockchip devices make sure you click “Uninstall Driver” first.
Then click “Install Driver” and when the driver has finish installing then shut down radxa board and connect the Radxa Rock board to your computer and let the board go to loader mode, then your computer will detect the board and you will see it within device manager.
Now the driver should have been installed successfully!
b. Install Manually
Download driver file first. For WinXp,Vista,Win7,Download the file (usb_driver_v3.5.zip) from here . For Win8 Download the file(usb_driver_v3.7.zip) from here. shut down the Radxa Rock board then connect the Radxa Rock board to the computer and let the board go to loader mode. After your computer should detect the board and you will see an unknown device within device manager.
Select the Unknown device then right click and select 'Update Driver Software'.
Select 'Browse the computer for driver software'.
Find the file unzipped file you downloaded earlier (usb_driver_v3.5.zip) and select either the 32/64bit folder then click 'OK' to install.
When the driver is installed successful you will then see a Rockusb Device in the device manager window.
Now the driver is installed successfully.
Flash Image
Download the tool first AndroidTool_Release_v2.71.zip
There are two methods to flash an image.
- Flash the whole firmware only, it will erase everything.
- Flash firmware by partitions, it's very convenient when debugging part function such as kernel
Flash the whole firmware
Power down the Radxa Rock board and connect the Radxa Rock board to the computer then let the board go to loader mode after the program should detect the device.
you can see “Found One MASKROM device “ at the bottom of the tool when you first flash the board or just unbrick the board
Or “Found One Loader Device” at the bottom of the tool when you flashed image not first time
Then Select an image (rockdev/update.img). For information on how to make nand image see update.img
After that, Click 'Upgrade ' to begin flashing
Flash firmware by partitions
Power down the Radxa Rock board and connect the Radxa Rock board to the computer then let the board go to loader mode after the program should detect the device.
you can see “Found One MASKROM device “ at the bottom of the tool when you first flash the board or just unbrick the board
Or “Found One Loader Device” at the bottom of the tool when you flashed image not first time.
Then select the partitions you need update, and select the right image which you can find under rockdev or kernel directory. finally click 'Run ' to flash
Note: if your address of the partitions doesn't the same as the pic below, you can modify the address by click the address item.
Here is the video you can refer
Troubleshooting
FlashTool can not recognize the board
This often happened by the follow reasons:
1) Not enter the loader mode (refer to [rock loader mode] [rock2 square loader mode])
Note:
In general, When you connect to PC with radxa( in loader mode), the PC can recongize radxa as Rockusb Device(windows)
2) the used usb port of pc is usb3.0 (please change usb2.0 port)
3) the OS of PC is windows 8 (if windows 8,please use http://dl.radxa.com/rock/tools/windows/Rockusb%20Driver%20v3.7.zip)
4) bad quality usb cable, you can change a short and good quality one to try again
If the problem still exists, you can refer to the topics in talk.radxa.com, create a new topic on it or send email to support@radxa.com
Flashing failed
For rock pro
After flashing, the uart print
and not boot.
If flashing failed, try to format the nand flash before flashing it.
- AndroidTool V2.3 -> Upgrade firmware - click 'Erease Flash' button to format the nand flash
- AndroidTool V2.3 -> Download Image - click 'LowerFormat' to format the nand flash
For rock2 square
you can press reset key and reflash , if still failed ,you can refer to http://talk.radxa.com/topic/957/bricked-rock2/19 or send mail to support@radxa.com
Preparing IDB failed
This happens at upgrading bootloader, if you need to upgrade the bootloader or the update.img contains a new bootloader, you probably will meet this. The rock is 'bricked'. Follow this unbrick instructions to unbrick it.
Win8.1 and USB 3.0
If you have problem with Win8.1 and USB 3.0, please check:http://talk.radxa.com/topic/1026/solution-rk-batchtool-problem-with-64bit-windows-8-1-usb3
Linux
Rockchip has provided tools for upgrading within Linux (closed source) since Android 4.4. It's called upgrade_tool.It supports update.img, parameter, bootloader and other partitions, and it's command line based.
rkflashkit is an open source GUI version flashing tool for rockchip devices. It can not flash bootloader or parameter, only supports kernel and other partitions, but it supports backup the partitions.
For developers:The initial RE work of the Rockchip bootloader updating protocol is by naobsd and has been improved by some in rkflashtool. linuxerwang has made a GUI version of the rkflashtool called rkflashkit. Please note: both rkflashtool and rkflashkit can not flash the rock/update.img and can only flash within rock/bootloader mode and not rock/mask rom mode because the rock/mask rom updating protocol is not RE yet. If you are interested in the RE protocol ping naobsd at #radxa on IRC. Since the rock/bootloader has remained unchanged for a long time it's enough for normal usage. If you don't know what this means, just ignore it.
Upgrade_tool from Rockchip
Download the Rockchip linux upgrade tool here. Unzip it and you will get a file called upgrade_tool which is a binary executable file under Linux.
Note: there are two ways to flash the android image.
1> Just flash one image file. refer to the 'Flash update.img' ,The image you can download here prebuilt_image . or you can build the image by yourself refer to Android_Build
2>Flash image by partitions,this methods you need flash serveral images depends on the partitions and your requirement. refer to 'Flash parameter ', 'Flash bootloader ','Flash the kernel(boot.img)'
Flash all-in-one nand/emmc image file(Recommended)
Let the board go to loader mode [Rock Loader mode], [Rock2 Square Loader mode] and run the following command to flash the update.img:
If you have an error with upgrading you can low level format the nand flash first with the following command:
Flash by partitions
The whole files you should flash are'parameter','bootloader','boot.img','recovery.img'system.img' , all the file you can find under the rockdev/ after you build the android successful.
How to flash the file and images.
Flash bootloader
Other partitions can be flashed by di command. You can use upgrade_tool di partition_name image_name to flash the image to the partition. There are some shortcuts for certain image name.
| partition name | short name |
|---|---|
| parameter | -p |
| boot | -b |
| system | -s |
| recovery | -r |
| misc | -m |
Flash parameter
or for short
Flash the kernel(boot.img)
or for short
Flash the rootfs
Others
There are other commands in the upgrade_tool, such as:
FAQ
1) why I must flash this file?
The android image is constructed by this files.
2)what's the paration info?
The partations info you can get from the paramteter file under the rockdev/ which in the android source code.
3) why other parations do have image to flash?
Other parations are used to store data.
4) why not flash the kernel.img ?
The kernel.img is packed into boot.img . more info you can refer to Android_Build
5) Other questions
Post on the talk.radxa.com or send email to support@radxa.com
Flash with rkflashtool(Advanced)
rkflashtool is an open source tool to write nand flash via the loader mode for rockchip platform.
To install rkflashtool:
To read/write parameter:
To read/write partitions:
Rkflashkit with GUI
You can download the pre-built rkflashkit here or build it yourself with the following command:
And install it with the following command
Run it with the following command
You can see the interface looks like this:
Connect the Radxa Rock board to the computer and let the board go into loader mode you will then see the the program detect the board in loader mode.
- Click the Nand partition and you will see the partitions of the board listed then choose the one you want to flash.
- Choose the location of the image you want to flash to that partition.
- Click the 'Flash image' button and it will start flashing
- After it's finished click 'Reboot Device' button to reboot the board.
Troubleshooting
Creating Comm Object failed!
that's udev issues… You can solve this by creating a new file in /etc/udev/rules.d/ with the rule for the rock.
To do that, copy and paste these commands:
Finally, just remove and reinsert the USB cable.
What's verision of My board and Which Image should I flash!
refer to update.img
Install the image on RR without PC
If you want to write the image on RR without any other host PC, you can download the image and write with dd:
Videos tutorial
- Flashing the image to nand flash https://www.youtube.com/watch?v=r20lOKu2E1s&feature=youtu.be
External Reference
This tutorial shows step by step instructions on how to flash Stock ROM on Android Smartphone or Tablet using RockChip Batch Tool on Windows Computer.
Before proceeding to flash Stock Firmware on Android using RockChip Batch Tool, it is recommended to follow the below preparation steps for smoother flashing experience.
Preparation:
- Make a complete backup of your important data to a safe place as flashing ROM firmware will wipe all of your data.
- Make sure your Android phone or tablet is charged to at least 50-60% before flashing the firmware.
How to Flash Stock ROM using RockChip Batch Tool
Step 1: Download and install the RockChip Driver Assistant on your computer to install the required Android drivers. If you already have RockChip Drivers installed on your computer, then you can skip this step.
Step 2: Download and extract Android Stock ROM Firmware for your smartphone or tablet from here to your computer.
Step 3: Download and extract the RockChip Batch Tool on your computer. After extracting, you will find files, as shown in the image below.
Step 4: Now run RKBatchTool.exe to launch RockChip Batch Tool.
Rockchip Android Tool 2.3 Download
Step 5: Once the RockChip Batch Tool launches, click on the Browse button […] and select the firmware which you have extracted in Step #2.
Step 6: Once you have successfully selected the firmware, RockChip Batch Tool will verify and load the firmware.
Step 7: Now, power off your phone and press and hold the Volume Up button and connect it to the Computer using a USB cable.
Step 8: Do not release the Volume Up button until the icon 1 turns Green, as shown in the image below.
Step 9: Once the device is successfully connected, i.e., when the icon 1 turns green, click on the “Restore” button to begin the flashing process.
Step 10: Now, the firmware flashing process will start, and it usually takes 4-6 minutes to complete.
Step 11: Once the flashing process completes, you will see the “Restore Done Success” or “Upgrade Done Success” message.
Step 12: Now close the RockChip Batch Tool by clicking on the “Exit” button.
Step 13: Disconnect your phone or tablet from the computer and restart it.
Rockchip Android Tool Download Windows
Congratulations! Now you have successfully flashed Stock ROM using RockChip Batch Tool on Android Smartphone or Tablet.